NP1 Equivalent
Polyurethane Sealant - High Quality, low price.
Stop paying too much for your sealants. Call us
today for all your sealant needs. Buy our high
quality sealants for much less than what you have been
paying for competing brands. Our polyurethane
sealant will provide superior performance in
applications where a high quality, flexible and long
lasting elastomeric sealant is required . If you
need a fast curing sealant, our Project 1 POLY-SEALANT
is a Modified-Polyurethane Sealant with very low VOC
content.
Project 1
ULTRA 5000 SERIES-PU JOINT SEALANT is a
one-component, polyurethane based, moisture curing
adhesive/sealant that maintains permanent
flexibility with high bond strength. Outstanding
durability and superior adhesion. Ideally suited for
use on window and door perimeter glazing, roofing,
fascia, vinyl siding applications, transportation
markets, manufactured homes, and substrates such as
concrete, masonry, aluminum, wood, vinyl,
clay/concrete roof tiles.
Specifications:ASTM C 557-73; Federal Spec
TT-S-00230C, Type II, Class A; ASTM C-920-87, Type
S, Grade NS, Class 25, Use NT, M and A; Chemically
acceptable to USDA for incidental food contact and
potable water.
Use this product in the place of:
NP1, Sika 221, Bostik 1100, Tremco Dymonic, Premier
XB 9500.
Warranty and Shelf Life:
Each application should be pre-tested for
suitability of this product for the intended use.
When stored in the original unopened container at 75
degrees F (24 degrees C) and 50% relative humidity
is guaranteed for nine months from date of purchase.
Instructions for use:
Surface Preparation: Surfaces must be dry, clean,
free of dirt, moisture, loose particles, oil,
grease, asphalt, tar, paint, wax, rust,
waterproofings or other contaminants. On metal
surfaces, remove scale, rust, or other coatings to
expose a bright white surface. Aluminum window
frames are frequently coated with a clear lacquer
that must be removed before application. Clean
concrete, stone, and other masonry surfaces by
grinding, sandblasting, or wire brushing. Expose a
sound surface free of contamination and dust. Wood
surfaces must be clean and sound. Scrape away any
paint to bare wood.
Very Low VOC Poly-Sealant
Project 1 4000
SERIES-MODIFIED POLY-SEALANT A one-part, gun grade,
moisture curing, low modulus sealant which cures at room
temperature and is paintable. It skins over much quicker
(20-30 minutes) than most general-purpose polyurethane
sealants. Project 1 Modified Poly Sealant has
exceptional adhesion to substrates such as bare metal
where conventional polyurethanes fail. It and has no
solvents or isocyanates. Use where a tough but flexible
seal or bond is required, interior applications such as
in automotive repairs, boat & yacht interior assembly,
recreational vehicle or trailer assembly, window and
door frames, ducting systems. Bonds well to marble,
granite, cultured stone, and many other solid surfaces.
Paintable. UV resistant formula also available. This
sealant meets the GREEN criteria for very low VOC
content.
Use this product in the place of:
NP1, Sika 221, Bostik 1100, Tremco Dymonic, Premier XB
9500.
Project 1 4000 Series sealant exhibits superior bond
strength to bare metals than competing products.
Warranty and Shelf Life:
Each application should be pre-tested for suitability of
this product for the intended use. When stored in the
original unopened container at 75 degrees F (24 degrees
C) and 50% relative humidity is guaranteed for nine
months from date of purchase.
Instructions for use:
Surface Preparation: Surfaces must be dry, clean, free
of dirt, moisture, loose particles, oil, grease,
asphalt, tar, paint, wax, rust, waterproofings or other
contaminants. On metal surfaces, remove scale, rust, or
other coatings to expose a bright white surface.
Aluminum window frames are frequently coated with a
clear lacquer that must be removed before application.
Clean concrete, stone, and other masonry surfaces by
grinding, sandblasting, or wire brushing. Expose a sound
surface free of contamination and dust. Wood surfaces
must be clean and sound. Scrape away any paint to bare
wood.
|
